HANDCUTTING
PROPERTIES
AND SPECIAL LINTEL DETAIL
| 1
BEEKMAN 2 BEEKMAN 30 BEEKMAN 55 CPW 65 CPW 88 CPW 91 CPW 115 CPW*** 145 CPW** 146 CPW** 211 CPW 239 CPW 262 CPW 300 CPW** 320 CPW** 336 CPW 1 EEA 25 EEA 33 EEA 120 EEA 130 EEA 11 FIFTH 39 FIFTH ss 51 FIFTH 810 FIFTH 834 FIFTH 860 FIFTH 870 FIFTH 875 FIFTH 880 FIFTH 910 FIFTH 912 FIFTH 920 FIFTH 930 FIFTH 936 FIFTH 960 FIFTH 965 FIFTH 1010 FIFTH 1016 FIFTH 1020 FIFTH 1025 FIFTH 1035 FIFTH 1056 FIFTH 1060 FIFTH 1107 FIFTH 1115 FIFTH 1120 FIFTH 1136 FIFTH 1148 FIFTH 1158 FIFTH 1165 FIFTH 1170 FIFTH 1215 FIFTH 40 GRAM PK N. 60 GRAM PK N. 955 LEXINGTON 1349 LEXINGTON 10 PARK 50 PARK 77 PARK 480 PARK 485 PARK 525 PARK 550 PARK 563 PARK 575 PARK 580 PARK 605 PARK 630 PARK 710 PARK 720 PARK 730 PARK |
755
PARK 765 PARK 775 PARK 785 PARK 791 PARK 815 PARK 829 PARK 830 PARK 863 PARK 888 PARK 895 PARK 911 PARK 930 PARK 940 PARK 941 PARK 950 PARK 955 PARK 960 PARK 969 PARK**** 975 PARK 983 PARK 1036 PARK*** 1040 PARK 1045 PARK 1060 PARK 1070 PARK 1075 PARK 1088 PARK 1095 PARK 1100 PARK 1105 PARK 1111 PARK**** 1125 PARK 1150 PARK 1155 PARK 1160 PARK 1170 PARK 1175 PARK 1188 PARK 1192 PARK 1220 PARK 1230 PARK* 5 RSD 50 RSD 54 RSD 90 RSD 100 RSD 110 RSD* 118 RSD 140 RSD 160 RSD 175 RSD 300 RSD* 2 SPS 14 SPS 36 SPS 45 SPS 50 SPS 246 WEA**** 300 WEA 400 WEA 522 WEA 545 WEA 580 WEA 610 WEA 145 E 49 433 E 51 455 E 51 415 E 52 434 E 52 435 E 52 444 E 52 320 E 57** |
345
E
57*** 410 E 57 419 E 57 430 E 57** 455 E 57 45 E 62 116 E 63 125 E 63 136 E 64 1 E 66 116 E 66 115 E 67 116 E 68 129 E 69 205 E 69* 30 E 70 33 E 70 3 E 71 135 E 71 142 E 71 19 E 72 55 E 72 141 E 72 125 E 72 215 E 72 245 E 72 340 E 72 210 E 73 220 E 73 20 E 74**** 112 E 74 168 E 74 174 E 74 ss 14 E 75 130 E 75 65 E 76 136 E 76 3 E 77 70 E 77 71 E 77 176 E 77 21 E 79 66 E 79 79 E 79 136 E 79 180 E 79 325 E 79 425 E 79 129 E 82 114 E 84 10 E 85 45 E 85 25 E 86* 49 E 86 520 E 86 530 E 86 535 E 86 40 E 88 47 E 88 17 E 89 14 E 90 21 E 90 15 E 91 4 E 95 49 E 96 60 E 96 2 W 67 17 W 67 330 W 72 161 W 75 174 W 76 6 W 77 16 W 77 40 W 77 44 W 77 161 W 77 171 W 79** 7 W 96 ss 12 W 96 |
| *
Angle
lintel
|
***
Replace
back
to riser |
230 E 73 = 42? Louver |
|
**
Angle
lintel and
handcutting |
ss
Special
specifications |
|
| ****
Galvanized
Lentil |
updated
2-17-11
The
cost of hole-cutting
is based on using electric tools.If for any reason
the seller is unable
to use electric tools, the selling price shall be
increased by the
amount of the additional cost. Please refer
with Management
regarding the use of electric hammers and
if not acceptable,
please advise our office immediately. Due to the
additional labor
required to perform the interior work by hand,
there will be an
additional charge $150.00 per wall penetration.
Should we be required
to have a "flag man" diverting pedestrian traffic
on the sidewalk
during overhead masonry work, the additional cost
is ONE HUNDRED NINETY
FIVE DOLLARS...($195.00) per unit.
HamiltonAir Company Inc. Contact our engineering dept. by e-mail engineering@hamiltonair.com
35 Mount Vernon Street, Ridgefield Park, NJ 07660-1496 Phone:201.440.9200 Fax:201.440.6981
262 West 38th Street, New York, NY 10018-5808 Phone: 212.682.2710
N.Y.C.D.C.A. Lic, #0839130